What is Rare Plumbing Website?

A bespoke digital atelier providing precision engineering and climate control services for London's most discerning luxury estates.

How much does Heatmiser installation cost in London?

A single-zone Heatmiser NeoStat installation typically starts from £350–£500 including parts and labour. Multi-zone NeoHub systems with 4–8 zones typically range from £900–£2,500 depending on the number of thermostats, whether wiring is required, and the complexity of the property. We provide a fixed price before any work begins.

How long does a Heatmiser installation take?

A single thermostat replacement takes 2–3 hours. A full multi-zone NeoHub system with 6–12 zones typically takes one full day. Larger properties with 12+ zones may require two days. All timings include full app setup and a walkthrough with the client before we leave.

Do you install Heatmiser in rented properties?

Yes. We work with landlords, letting agents and property managers across London. We can coordinate access with tenants and provide all documentation required for landlord records. Heatmiser installations are compatible with most modern boiler systems.

Can Heatmiser work with my existing boiler?

Heatmiser Neo is compatible with virtually all modern gas, oil and LPG boilers. For Vaillant, Viessmann and Worcester Bosch boilers with OpenTherm capability, we can set up OpenTherm modulation for improved efficiency. We carry out a compatibility check before every installation.

What is the difference between NeoStat and NeoAir?

The NeoStat is a wired thermostat — it requires a cable connection back to the boiler or zone valve. The NeoAir is wireless, communicating with the NeoHub via RF signal. Wired is generally more reliable; wireless is quicker to install and ideal where cable runs aren't practical. Both work identically in the Heatmiser Neo app.

Does Heatmiser work with underfloor heating?

Yes — the NeoStat has a built-in floor sensor input, which is essential for UFH to prevent overheating of engineered timber or stone floors. We routinely integrate Heatmiser with wet UFH systems, including connecting to zone valves on UFH manifolds.

Is Heatmiser better than Nest or Tado?

Heatmiser is the preferred choice for multi-zone properties with underfloor heating — it supports up to 32 zones on one NeoHub and has dedicated floor sensor inputs. Nest and Tado are better suited to single-zone radiator systems. For London townhouses with mixed UFH and radiators, Heatmiser is almost always the right choice. See our detailed comparison at /compare/tado-vs-heatmiser.

Can I install Heatmiser myself?

Heatmiser thermostats involve mains-voltage wiring and connection to your boiler or zone valves, so installation must be carried out by a qualified engineer. DIY installation risks invalidating your boiler warranty and contravening Part P electrical regulations. We provide full installation, commissioning and certification.

What warranty do you provide on Heatmiser installation?

Heatmiser products carry a 2-year manufacturer warranty. Our installation workmanship is guaranteed for 12 months. We also provide post-installation support — if your system needs reconfiguration or a firmware update, we can attend or assist remotely.

Do you remove and dispose of my old controls?

Yes. We remove your existing programmer, thermostats and any redundant wiring, and dispose of all waste responsibly. In listed buildings or period properties we take care to preserve backplates and decoration where possible.

020 7458 4949

23°C020 7458 4949 Book Now

Heatmiser Installation — London

Heatmiser Neo Installation London — Cost, Process & Setup

Professional Heatmiser NeoHub, NeoStat and NeoAir installation by London's smart heating specialists. Single-zone upgrades to full 32-zone multi-room systems — all configured, app-ready and fully supported.

Gas Safe Reg. No. 514171 Same-day response available Multi-zone specialists 5★ Google Rating

020 7458 4949 Get a Quote

Heatmiser Repairs Heatmiser for UFH Underfloor Heating Smart Thermostats

Get a Heatmiser Installation Quote

Tell us about your property for a fixed-price quote.

What do you need? *

Your Postcode *

What We Install

The complete Heatmiser Neo range.

We install and commission every product in the Heatmiser Neo range, from single thermostat upgrades to full 32-zone NeoHub systems in large London townhouses.

Hub

Heatmiser NeoHub 2

The central controller for the Neo system. Connects up to 32 thermostats via wired or wireless bus. Wi-Fi enabled, app-controlled, Alexa and Google compatible. Essential for any multi-zone installation.

Wired

Heatmiser NeoStat

Wired wall thermostat with floor sensor input. The standard choice for wet underfloor heating and conventional radiator systems. Available in white, anthracite and brushed steel.

Wireless

Heatmiser NeoAir

Wireless thermostat communicating with the NeoHub via RF. Ideal where cable runs aren't practical. Identical app functionality to the NeoStat — just no cable required.

Electric UFH

Heatmiser neoStat-e

Dedicated thermostat for electric underfloor heating. Controls the electric UFH element with the same precision scheduling and floor sensor protection as the wet system equivalent.

Advanced

OpenTherm Modulation

For compatible boilers (Vaillant, Viessmann, Worcester Bosch), we configure OpenTherm modulation — the boiler communicates with the NeoHub for improved efficiency and quieter operation.

Setup

Multi-zone Commissioning

We configure every zone individually, set room-by-room schedules to match your household routine, and set up the app on all required devices before we leave the property.

Installation Costs

Heatmiser installation cost in London.

Fixed-price quotes with no hidden charges. The table below shows typical ranges — your final quote depends on the number of zones, wiring complexity and whether your property has existing smart controls to upgrade.

Installation type	Typical cost	Time on site
Single NeoStat replacement (wired)	£350–£500	2–3 hours
Single NeoAir (wireless) + hub	£500–£700	3–4 hours
4-zone NeoHub system	£900–£1,400	1 day
8-zone NeoHub system	£1,600–£2,500	1 day
16+ zone NeoHub (large townhouse)	£2,800–£4,500	1–2 days
OpenTherm module setup (add-on)	£150–£250	1 hour
UFH manifold zone valve integration (per zone)	£120–£180	1–2 hours

All prices include parts, labour, app setup and a client walkthrough. Prices exclude VAT. We provide a fixed written quote after a site survey — no estimate surprises.

Our Process

How a Heatmiser installation works.

Survey

We visit the property and assess your current heating system, zone layout and any existing controls. We confirm compatibility and provide a fixed quote.

Design

For multi-zone systems, we design the thermostat layout and NeoHub wiring plan. All equipment is specified and ordered before we return to install.

Installation

Our engineers carry out all wiring, thermostat fitting and hub installation to a clean, tidy standard — particularly important in high-specification interiors.

Commissioning & Handover

We configure the app on your devices, set room-by-room schedules and walk you through everything before we leave. Full documentation provided.

Ready to install Heatmiser?

Get a fixed-price quote for any Heatmiser installation across London. Our engineers are Gas Safe registered and available 7 days a week.

Site survey available

App setup & training included

Full documentation provided

Post-installation support available

Book a Heatmiser Specialist

Available across all prime London areas.

What do you need? *

Your Postcode *

Recent Project

Heatmiser NeoHub — 14 zones, Marylebone Georgian townhouse.

Heatmiser NeoStat V3 smart thermostat installed by RARE Plumbing London in a Marylebone property

Smart ThermostatsHarley Street, Marylebone

14-zone NeoHub system — Georgian townhouse, Marylebone

A six-bedroom Georgian townhouse with a single-zone programmer was upgraded to 14 fully independent zones — 8 radiators and 6 UFH manifold zones — all on one NeoHub and one app. Energy bills dropped 25–30% within the first month.

14 independent zonesMixed UFH + radiatorApp on 3 devices25–30% energy saving

Read Full Case Study

Heatmiser Installation Areas

MayfairMaryleboneHampsteadKnightsbridgeBelgraviaSt John's WoodNotting HillPrimrose HillSouth KensingtonChelseaPimlicoPaddingtonWest HampsteadBelsize Park

Don't see your area? Call us — we cover most of Greater London.

FAQs

Heatmiser installation — common questions.

Get a Fixed Quote

Heatmiser installation specialists. No obligation.

020 7458 4949 Get a Quote

Related Services

Heatmiser Repairs Heatmiser for UFH Heatmiser Neo Hub Troubleshooting Underfloor Heating Smart Thermostats Tado vs Heatmiser

Authoritative Sources & References

Source
Heatmiser — Room Thermostat & Underfloor Heating Controls
Heatmiser — The official site for Heatmiser, a UK-leading manufacturer of smart room thermostats and underfloor heating controls, including the Neo range.